Steam cleaning upholstery may be a deep cleaning method and can help restore the furniture to its original condition in some ways. According to Keller Carpet Cleaning, another benefit is that it effectively rids upholstery of dust mites and allergens which will cause physical reactions.

Important Preparation and Consideration Before Steaming Process

Loose Dirt – it’s an honest idea to vacuum upholstery before steam cleaning to rid the furniture of loose dirt and debris. Use the upholstery attachment of the vacuum for best results. A whisk is often wont to remove crumbs and particles from crevices. A lint brush is useful in removing pet hair.

Follow Directions – Follow the manufacturer’s recommendations for tank fill level and solution mixture. Many manufacturers won’t honor warranties or damage claims if the recommended cleaning solution isn’t used. Of course, many steam cleaner manufacturers sell the accompanying products recommended to be used.

Make sure the manufacturer’s handbook is handy before cleaning and follow the rules included.

Testing – Once the recommended cleaning solution has been added and therefore the tank is filled, find a not noticeable spot on the upholstery to undertake the steam cleaner out. to completely see the results, the test area should be allowed to dry completely before attempting to steam the remainder of the piece.

Steam Cleaning Proper

Arm covers and cushions should be far away from the furniture and cleaned separately from the frame. Steam cleaning one section at a time will yield the simplest results.

It is not the aim of steam cleaning to saturate the upholstery. Cleaning strokes should be slow enough to make sure accuracy but fast enough to avoid saturation. Start at the highest of the upholstery and make strokes cross-wise working towards rock bottom.

When steam cleaning cushions, clean one side at a time and permit it to dry before cleaning the opposite side. If the cushions are attached to the bottom or frame clean them last.

It may be necessary to repeat the cleaning process. Ample time for the upholstery to dry between cleaning applications should be allowed.

If the upholstery has been previously steamed cleaned or shampooed, anti-foaming cleaning solutions are suggested to scale back the quantity of suds which will occur thanks to residual cleaning fluids.

Steam cleaning is best for a general cleaning application but not for hard-to-remove stains. Stubborn stains should be treated separately and completely dry before steam cleaning.


Leave a Reply

Avatar placeholder

Your email address will not be published. Required fields are marked *